Structural Perspective 2

Snow Loads

In the Northern Hemisphere, January and February are typically the coldest months in the year. The American Society of Civil Engineers and/or local jurisdictions usually governs the amount of ground snow loads that Engineers need to consider in their design. On average, snow accumulation on the roof of a typical single family home can be 30% less than the ground snow accumulation.

FACTORS GOVERNING SNOW LOADS:

Exposure

Buildings in open areas tend to accumulate more snow on the roof. Nearby trees, buildings, or structures can limit the total amount of snow that can accumulate on a specific building under consideration.

Thermal

Typical building structures are heated. As such, the roofs are considered warm. As a result, some of the snow that falls on the roof will melt, reducing the total accumulation.

Slope

Roofs with steep slopes can assist with snow load reduction, as the snow is likely to slide off the roof.

Building Importance

Buildings such as Hospitals, Fire Stations and Police Stations are considered essential structures, and are generally designed for higher loads than residential buildings.

OTHER IMPORTANT FACTORS TO CONSIDER

Snow Drifts: Winds can blow snow from one side of the roof to the other. This can create an unbalanced condition or higher accumulation levels on one specific side of the roof structure. Additionally, in an urban environment, snow can blow or fall from upper roofs down to lower roofs, creating higher localized unbalanced snow accumulation. 

Snow drift from one side of the roof to the other

Snow accumulation on lower roofs may be higher in urban areas.

---

Photo Cred: Squarespace Stock Images